Well W52P Скачать руководство пользователя страница 54

Страница: 54 / 162

User Guide W52P IP DECT Phone

Placing a Call Using Speed Dial

Placing a Call Using Speed Dial Key

Key

To place a call using the speed dial key:

Long press the speed dial key (digit key) when the handset is idle.

The number assigned to this speed dial key is dialed out.

Auto Answer

When the auto answer feature is enabled, you can simply answer the incoming calls by

lifting the handset from the charger cradle without having to press the off-hook key. The

auto answer feature works only if the handset is placed in the charger cradle.

To configure the auto answer feature:

Press to enter the main menu.

Select ->

Telephony

Auto Answer

Press the

Change

soft key to check or uncheck the

Auto

Answer

checkbox.

Auto Intercom

Intercom calls are internal calls made between handsets registered to the same base

station. You can enable the auto intercom feature on the handset to automatically

answer an incoming intercom call. The following three configuration types of the auto

intercom feature are available for selection:

On (Beep On)

: The auto intercom feature is on. The handset will answer an

incoming intercom call automatically after playing a warning tone.

On (Beep Off)

: The auto intercom feature is on. The handset will answer an

incoming intercom call automatically without playing any tone.

Off

: The auto intercom feature is off. You need to answer an incoming intercom

call by pressing the

Accept

soft key.

To configure the auto intercom feature:

Press to enter the main menu.

Select ->

Telephony

Auto Intercom

The LCD screen displays three configuration types for selection.

Press or to highlight the desired configuration type, and press the

Change

soft key.

The radio box of the selected configuration type is marked.

Содержание W52P



































































































































































Результаты поиска

Содержание W52P

Отзывы:

Well W52P, Руководство пользователя, Страница: 54 / 162

Результаты поиска

Содержание W52P

Отзывы: