5
2.
Commands of your appliance
Some advantages of the Well Straler new product generation:
Automatic ignition without steady pilot;
Precise digital temperature control in a range of ± 6 m from the heater;
Wireless RF remote control of all the functions of your heater in a range of
± 6m;
Four different operation modes: (ON/OFF – THERMOSTAT – WEEKLY
PROGRAM – COUNTDOWN TIMER);
Full automatic pre-programmed weekly program with 4 independent
temperature ranges each day, seven days a week.
Manual setting of the flame height at the receiver;
Flame height adjustable by the transmitter.
IMPORTANT For the device to work properly, the emitter and receiver must be well tuned to each other (cfr.
LEARN, p.14). If the range is lower than 6 m, the antenna of the receiver (black wire on the side) must be moved.
2.1
Transmitter
The transmitter operates on 2 AAA-size 1,5V batteries. We recommend the use of ALKALINE BATTERIES for
maximum operation performance. Insert batteries into the battery compartment on the back of the transmitter,
positioning the (+) and (-) ends of the batteries as indicated. Once batteries are inserted, the blinking symbol of
antenna or the text “LEARN” will display. If this is not the case please check that batteries are inserted properly
(check polarity).
CAUTION: always use the correct type of batteries, in order to avoid explosion. Remember to preserve our
environment and bring the used batteries to a collection point.
2.2
LCD-screen
1.
PROGRAM FOR
: Displays when programming days and
periods of day.
2.
DAY
: Current day of week.(MO, TU, WED, THU, FR, SAT, SUN)
3.
PERIOD
: Current period of day.
4.
MODE
:
Indicates operation mode of system
ON
(Indicates system is on, regardless of the ambient
temperature))
OFF
(Indicates system is turned off)
THERMO
(Indicates the system will automatically cycle,
depending on the programmed
SET
temperature)
PROGRAM
(Indicates the system is operating with
programmed
settings).
5.
START AT
: Appears while programming the time to turn the
system on.
6.
SET
: Indicates desired
SET
room temperature..
7.
F°/C°
:
Temperature, in Fahrenheit or Celsius.
8.
TIME/TEMP
: Displays current room temperature. In the same
frame, the current time will display in AM or PM. Press
TIMER
to display current time.
9.
LOW
: Battery power is
LOW
. Replace batteries within two
weeks.
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
10.
TIMER
: When displayed, indicates countdown timer in operation.
11.
OVERRIDE
:
Displays when the set
temperature is overridden.
12.
FLAME
:
Single or double flame symbol indicates burner is operational in
LOW/HI
mode.
13.
CP
: Displays when CHILD PROOF—LOCK OUT“ is engaged. Pressing
TIMER
and
FAN
buttons together for more
than 5 seconds, engages or disengages
CP.
14.
FAN
: indicates the
FAN
is operating in normal speed
LOW
or
HI
speed.
15.
TRANSMIT
: Symbol of antenna lights up shortly whenever a signal is send from the transmitter to the receiver
and blinks slowly when the transmitter doesn’t find connection with the receiver. .
