15
2.6.4 Fixation of sensor of thermostat
The receiver is equipped with an extra thermostatic sensor that will be activated if the signal of the
transmitter disappears.
This sensor is self adhesive and can be stuck on any smooth surface. Take care that
the sensor is installed where normal air convection is possible. The installer has to find the best location.
The antenna of the receiver may not touch the ignition cable (min. 2 cm).
2.7.
Problem solver
PROBLEM
CAUSE
Only symbol of antenna
blinking slowly or LEARN
visible
on
LCD
after
insertion of the batteries
The receiver is not tuned to the
transmitter
Execute “LEARN” procedure (see 2.6.2)
The appliance does not
react on transmitter
The receiver is in ‘OFF’ position
Place the receiver button in ‘REMOTE’
position
The receiver is not tuned to the
transmitter
Execute “LEARN” procedure (see 2.6.2)
The receiver is out the operating
area of the transmitter.
Move the antenna to a free space (the
outside of the appliance is the maximum
range area) so that the operating range is
wider
Thermostatic sensor
Antenna
