4
1.3.3.
Safety for temperature sensor of transmitter
By defect of the temperature sensor of the transmitter, the red led will also start blinking (0.5 second on, 0,5
second off) and the system will switch to the temperature sensor of the receiver. All other functions of the
transmitter will continue to function normally.
1.3.4.
Safety for temperature sensor of the receiver
By defect of the temperature sensor of the receiver, the red led will also start blinking (short on, long off). As
long as the transmitter stays in the operating area of the receiver, the fire will work normally because the
temperature will be controlled by the sensor in the transmitter.
If the signal from the transmitter is lost, the receiver does not get more accurate information and will go into
failure: the fire will extinguish and the red led will glow constantly.
When the transmitter will come again
within reach, the receiver has first to be reset before activating the fire. For this purpose, press on
OFF
on the
transmitter or on
RESET
on the receiver. During this operation, the receiver will peep several times in quick
succession.
1.3.5.
Thermo-safety – receiver
The system has a thermo-safety feature that is built into the receiver. This feature is temperature-activated
and it provides an extra margin of safety in case the receiver should be placed where ambient temperatures
exceed 65°C. At 65°C the thermostat
will automatically shut down the fireplace and the receiver
will begin
emitting a series of 4 beeps every 2 seconds. When the ambient temperature near the receiver drops under
50°C, you can reactivate the appliance.. The system resets itself.
1.3.6.
Child Protection (CP)
The system includes a child-proof ‘lock-out’ feature that allows the user to ”lock-out
’
operation of the
appliance from the transmitter.
REMARK
: It only prevents the manual operation of the transmitter. The appliance will continue working
normally in the operating mode that was selected before activation of the CP “lock-out”.. To totally”lock-out”
the operation of the transmitter’s
operating signals, the transmitter
’
s mode must be set to OFF before
activation of CP..
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
-
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
1.
To activate the ”LOCK-OUT‘, press and hold
the
TIMER
and
FAN
buttons together for
5 seconds. The letters
CP
will appear in the
TEMP
frame on the LCD-screen.
2.
To disengage the ”LOCK OUT,‘ again press and
hold the
TIMER
and
FAN
buttons together for
at least 5 seconds.
1.4.
Appliances with ventilator
To prevent cold air to flow out of the cooled-down appliance, the ventilator begins working after the appliance
has warmed up (± 7 minutes warming up at the maximum rate). After extinction of the burner the ventilator
keeps working for ± 25 minutes, in order to use the residual warmth.
