- 3 -
Handle carefully
Temperature limit
Upward
Piling layer limit
Keep dry
Protect against heat
General tips for equipment operation
Note:
The equipment is use only for veterinary.
◆
In
operation
1. Heat radiation holes are strictly prohibited to be covered.
2. After closedown, do not switch on the equipment within 2 - 3 minutes.
3. On scanning, if any abnormal case is found, stop scanning immediately and shut down
the equipment.
4. The patient is prohibited to touch any non-applied part of the equipment.
5. When operating, do not press the keyboard panel too much, otherwise the equipment
might be damaged.
◆
After operation
1. Power off the equipment.
2. Pull out the plug from power supply socket instead of pulling the cable.
3. Clean off the couplant on the probe with soft medical sterilized cotton ball.
4. Put the probe into the special case.
General Safety Message
Safety of the operator and patients and reliability of the equipment are taken into consideration
during designing and producing, the following safety precaution must be implemented:
