- 10 -
2 Installation
2.1 Operation environmental requirements
Environment temperature range: 0
℃~
+40
℃
Relative humidity range:
≤
80%
Atmosphere pressure range: 70KPa
~
106Kpa
Power supply: a.c.100V
~
240V,50Hz±1Hz/60Hz±1Hz
Avoid strenuous vibration during operation; Keep away from equipments with high
electric field, high magnetic field and high voltage; avoid strong sunlight on the display;
Keep the equipment well-ventilated, damp proof and dustproof.
Note:
Check according to the "packing list" after uncasing and make sure that there is no
shipping damage, and then install the equipment according to requirements and
methods described in “Installation”.
Warning:
If there is breakage at unpacking check, it is banned to use the device to ensure
security.
The probe should be protected from felling off or crashing and the manufacturer.
2.2 Installing and disassembling battery
Install battery: Set the battery into the battery slot and move the battery release key on its side to top
till the battery is inserted completely and then release the key (refer to figure).
Disassemble battery: It is the reverse process of installation (refer to figure).