- 22 -
5 Image processing
5.1 Overview
Press “
FUNC/4
”button to display the menu which including some image processing functions, then press
the corresponding number to enter. The “V1.10” on the top of menu presents current software version
number. Press
button to exit the menu.
5.2 Cine loop
First of all, save all pieces of static image in temporary memory (the data in temporary memory will be lost
when the power is off), then play these static image continuously to realize the function of cine loop.
Operate as the following steps:
1.
Start the equipment into real-time scanning mode, and allow the equipment to conduct the cine
loop image collection, the collect time is about 30 seconds.
2.
Freeze the image, press “FUNC/4”→“0”button in turn to playback, and the image is played in a
continuous loop. The playback state “XXX/XXX → ”is displayed on
the bottom left of the screen. “XXX/XXX” present current frame and total frame separately.
3.
Press ▲5 and ▼6 button during the playback to realize frame step play. Press
“FUNC/4”→“0”button in turn again to back to auto repeat mode.
4.
Press “
”button to exit the cine loop.
Tip:
Press “BB” button to switch different windows during the playback in BB mode.
If the image scanning way, probe or display mode is changed, the cine loop operation wouldn’t
work until ordinary scanning is conducted for 30 seconds.
-----V1.10-----
0.
CINE LOOP
1.
SAVE
2.
SVLOAD
3.
ZOOM
4.
UP-DOWN
5.
LEFT-RIGHT
6.
COLOR
7.
AREA-VOLM
8.
HISTOGRAM
9.
ERASE
