Welger P 202 SPECIAL, Руководство по эксплуатации

Страница: 84 / 95

80 WELGER RP 202 • RP 220 • RP 302 • RP 320
12.13. Lubrication chart
after every 500 bales (or daily)
Item
(fig. 96)
Baler component Lubricant
(Table 4)
Remark
1 Universal drive shaft A
2 Chain lubrication B Right side of baler
(fig. 94 and fig. 96)
3 Tailgate hinge1) A Both sides
4 Lubricating manifold*, left front
A
2)
Lubricating manifold*, right front
A
2) not shown in fig. 96
5 Lubricating manifold*, left rear
A
2)
Lubricating manifold*, right rear
A
2)
not shown in fig. 96
6
Locking hook
1)
A Both sides
7 Locking roller A Both sides
8
Cutting rotor*
1)
A Both sides
9 Swivel wheels* A Both sides
10 Tailgate guide dome A On right side of baler: grease
11 Pick-up unit 2.00 m ( SPECIAL ):
•
bearing of actuator (1x)
•
bearing of rake shaft (2x)
•
Sliding bearing of rake (2x)
A not shown in fig. 96
18 Roller lubrication F Right side of baler
(fig. 95 and fig. 96)
1)
depending on the fitted equipment, already served by central lubricating manifold
2)
Supply the lubricant distributor with 1 - 2 cautious strokes from a hand lever grease gun – do not use a
compressed air grease gun.
yearly after the end of season (weekly under extreme operating conditions)
Item
(fig. 96)
Baler component Lubricant Remark
12 Star ratchet in the pick-up unit drive A
For 1.50 m pick-up, only
installed outside the EU
13 Main gear box
•
RP 202 / RP 302
•
RP 220 / RP 320
•
RP 220 / RP 320 („V V“)
3)
C / 1,65 l
C / 1,50 l
C / 2,00 l
Oil change
Check oil level with dipstick or
overflow hole
14 Moveable parts of the net wrapping
system* D Keep running smoothly
15 Moveable parts of the twine wrapping
system* D Keep running smoothly
16 Locking hook disc spring E
Dismantle, clean and grease;
Warning: do not change sensor
settings!
17 Twine guide eyes A Lightly grease chafe mark
3)
Gearbox is labelled on the top side with the letters "V V"