Welger P 202 SPECIAL, Руководство по эксплуатации

Страница: 50 / 95

46 WELGER RP 202 • RP 220 • RP 302 • RP 320
8.4.2. Hold-down device / Pick-up unit short crop guard*
For all types of pick-up unit, the hold-down device is movable
and hangs over the pick-up drum. The height of the hold-down
device rake can be adjusted by using the chain to allow for
various windrow thickness.
The upper end of the chain must always be hung on the hook in
order to prevent it from being caught up in the pick-up unit.
Special Notes:
RP 202 CLASSIC / RP 302 CLASSIC
Pick-up unit width 1.50 m (fig. 64 )
As an optional feature, a pick-up unit short crop guard can be
supplied (not shown). It prevents short baling crops from falling
away ahead of the pick-up unit.
For installation, locate both brackets of the pick-up short crop
guard onto the inside of the hold-down device and secure on
each side by using a spring pin. Adjust the setting by using the
chain with swivel hooks. Set high or remove the pick-up unit
short crop guard for long crops.
RP 202 SPECIAL / RP 302 SPECIAL
Pick-up unit width 2.00 m (fig. 65)
The hold-down device rods [1] should be parallel to the pick-up
unit bottom plate. For adjustment, use the connecting bar [2] on
the left side of the baler.
RP 220 and RP 320
Pick-up unit width 2.00 m and 2.25 m (fig. 66)
For pick-up units with pick-up width of 2.25 m, both
support wheels cover the sides of the rotating tines and
therefore also form part of the installed safety equipment.
When using the baler, both support wheels must be installed at
all times.
1742-42
fig. 64
1724-34
1
2
fig. 65
fig. 66