Welger P 202 SPECIAL, Руководство по эксплуатации

Страница: 49 / 95

WELGER RP 202 • RP 220 • RP 302 • RP 320 45
8.4. Pick-up unit
RP 202 • RP 302 CLASSIC / SPECIAL
RP 220 • RP 320 FARMER
The pick-up unit is raised and lowered by operating the tractor
control valve.
Read and observe the separate operating manual
„BALERCONTROL III with Graphic Display for RP 220/RP 320“.
RP 220 • RP 320 MASTER / PROFI
An electro-hydraulic manifold block (Hydraulic switch*) makes it
possible to operate a number of different hydraulic functions
with a single control valve.
In order to raise or lower the pick-up unit, press the button
(shown opposite) on the “Balercontrol” control panel (fig. 61).
The symbol “Pick-up” appears in the display field of the control
panel
( fig. 62 ).
The connected tractor control valve can now be used to actuate
the pick-up lifting mechanism.
8.4.1. Support wheels*
When on the field, set the pick-up unit support wheels to give
the tines a ground clearance of at least 2 cm. To set the support
wheels, raise the pick-up unit. Pull out the spring retainer [1] and
align the bracket [2] with the desired hole (fig. 63); secure the
support wheels once again with the spring retainer. Provide the
same setting on both sides.
1742-41
fig. 61
fig. 62
fig. 63