Welger P 202 SPECIAL, Руководство по эксплуатации

Страница: 41 / 95

WELGER RP 202 • RP 220 • RP 302 • RP 320 37
RP 220 FARMER - RP 320 FARMER
with cutting unit, with swivel floor
Pick-up unit width 2.0 metres
Activating the cutting device:
1. Open the shut-off valve on the left side of the baler
(fig. 45), i.e. move the lever into the vertical position.
2. Activate the "raise" function on the connected tractor valve
until the cutting device moves into its working position.
(If the swivel floor
(HYDROFLEXCONTROL ) was open, it
will also move upwards.
3. In order for the hydraulic accumulators to fill, continue to
activate the control valve for another 5 seconds after the
cutter blades have moved in.
4. Close the shut-off valve (fig. 45), i.e. move the lever into the
horizontal position.
Deactivating the cutting device:
1. Open the shut-off valve on the left side of the baler (fig. 45),
i.e. move the lever into the vertical position.
2. Activate the "raise" function on the connected tractor control
valve for about 5 seconds. Blades and conveyor channel
floor will move downwards one after the other.
3. Close the shut-off valve (fig. 45), i.e. move the lever into the
horizontal position.
4. Activate the "raise" function on the connected tractor control
valve until the conveyor channel floor is completely closed.
Tip:
In order to ensure free movement of the individual blades, move
the cutting device in and out several times each day.
The shut-off valve (fig. 45) is only opened for moving the blades
in and out.
During normal operation the shut-off valve must always remain
closed (position “0” in fig. 46).
fig. 45
0387.67.00.00
0
I
fig. 46