59
BUG-O SYSTEMS INTERNATIONAL
EC DECLARATION OF CONFORMITY
Manufacturer and technical
documentation holder:
Bug-O Systems International
a Division of Weld Tooling Corporation
280 Technology Drive
Canonsburg, PA 15317-9564
Hereby declare that machinery:
Modular Drive System
, including options and accessories
Sales codes:
MPD-1000, MPD-1002, MPD-1004, MDS-1002, MDS-1003,
MDS-1004, MDS-1005, MDS-1005-DIAL, MDS-1165, BUG-6050,
FMD-1090, FMD-1095, FMD-1100, FMD-1105, MPD-1065, BUG-5910,
BUG-5960, PSR-1050, MPD-1035, MDS-1050, BUG-5285, MDS-1040,
BUG-5275, WPD-2100, CAS-2060, AVC-2060-XX, WPD-1100,
AVC-2050-PL-XX, CAS-2050, WPD-1100-40, MDS-1055, FMD-1045
(All of which may also contain prefixes and suffixes)
Kits that include the above:
MDS-4000 series Kits
FMD-4000 series Kits
(kits in each series may also contain prefixes and suffixes)
Is in conformity with Council Directives and amendments:
•
2006/42/EC – Machinery Directive
•
2014/35/EU – Electromagnetic Compatibility (EMC) Directive
•
2011/65/EU – Restriction of the use of certain hazardous substances (RoHS)
Standards:
•
EN 12100:2010 – Safety of Machinery – General principles for design – Risk assessment and
risk reduction.
•
EN 60204-1:2016 – Safety of machinery – Electrical equipment of machines Part 1: General
Requirements.
•
EN 61000-6-2 – Electromagnetic compatibility (EMC) – Part 6-2 Generic standards – Immunity
for industrial environments.
•
EN 61000-6-4 – Electromagnetic compatibility (EMC) – Part 6-4 Generic standards – Emissions
for industrial environments.
•
EN 50581:2012 – Technical documentation for the assessment of electrical and electronic
products with respect to restriction of hazardous substances.
The machinery, product, assembly or sub-assembly covered by this Declaration of Conformity must not be
put into service until the machinery into which it is to be incorporated (if applicable) is declared in conformity
with provisions of the applicable directives(s).
Authorized representative for the compilation of the relevant technical documentation and issuer of EC Dec
-
laration of Conformity:
Date of Issue: MAY 23, 2019
Place of issue: 280 Technology Drive, Canonsburg, PA 15317, USA
Typed Name of Authorized Person: MATTHEW W. CABLE - PRESIDENT
