42
SEMI-FLEX RAIL
SEMI-FLEX RAIL
can be bent inside or
outside to a minimum radius of 15' (4.6 m)
or 30' (9.1 m) diameter without permanent
deformation.
AFR-3000 SEMI-FLEX RAIL replaces the old AFR-1000, 1010, 1020 and the later AFR-2000 rails. All the
rack-mounting holes on the AFR-3000 Semi-Flex Rail are slotted so that the rack can slide along the rail.
The length of the slots has been increased so that the rails can now be leapfrogged around a complete
circle. The tension of the screws holding the rack on the rail is adjusted so that the rack can be moved along
the rail with the AFR-2001 Rack-Adjusting Tool.
NOTE:
Use at least four attachments (magnets or vacuum cups) on each SEMI-FLEX RAIL.
CAUTION:
Bending beyond the recommended 15'-0" (4.6 m) radius may put
a permanent bend in the rail and break off some of the rack screws.
ITEM QTY
PART NO.
DESCRIPTION
1
16
AFR-1015
Spacer Washer
2
1
AFR-2001
Rack Adjusting Tool
3
1
AFR-3002
Splice Plate
4
1
AFR-3006
Rack
5
1
AFR-3009
Extrusion, Punched
6
2
FAS-0855
Flt Hd Soc Scr 1/4-20 x 1/2
7
2
FAS-0955
Flt Hd Soc Scr 1/4-20 x 1/2
8
16
FAS-1446-HW
S.T. Slotted Hex w/Washer 10-32 x 5/8
9
16
WAS-0230
#10 Washer
PARTS LIST
4
6
1
7
9
8
3
5
A 2.75" (70mm)
B 4.0"
(102 mm)
C .33"
(8.5 mm)
D .500" (12.7 mm)
A
C
D
B
AFR-3000 / SEMI-FLEX RAIL
2
MIN. RADIUS
15' (4.6 m)
8'
(2.37 m)
8'
(2.37 m)
