Welch Allyn Schiller AT-2plus, Руководство пользователя

Страница: 55 / 66

AT-2plus User Guide Spirometry Supplement Page 45
Art. No. 2. 510339wa ©1999
AT-2plus User Guide Spirometry Supplement Page 45
Art. No. 2. 510339wa ©1999
Care & Maintenance
WARNINGS: ONLY THE SENSOR HANDLE AND CABLE CAN BE CLEANED - DO NOT ATTEMPT TO CLEAN THE DISPOSIBLE
MOUTHPIECE.
DISCONNECT THE SENSOR FROM THE UNIT BEFORE CLEANING. DO NOT, UNDER ANY CIRCUMSTANCES,
IMMERSE THE APPARATUS INTO A CLEANING LIQUID OR STERILIZE WITH HOT WATER, STEAM, OR AIR.
Cleaning the Thermal Print Head
If the printer is used a lot, a residue of printers ink ( from
the grid on the paper) can build up on the print head.
This can cause the print quality to deteriorate. We
recommend therefore that every month the print head is
cleansed with alcohol as follows:
Remove the paper tray. The thermal printhead is found
under the paper tray release catch.
With a tissue dampened in alcohol, gently rub the
printhead to remove the ink residue. If the printhead is
badly soiled, the colour of the paper grid ink (i.e. red or
green) will show on the tissue.
Cleaning the Sensor Assembly
The sensor casing can be cleaned with a soft damp cloth on
the surface only. Where necessary a domestic non-caustic
cleaner can be used for grease and finger marks.
Cleaning the Sensor Cable
ALIGN THE SENSOR CABLE IN SUCH A WAY AS TO
PREVENT ANYONE STUMBLING OVER IT OR ANY
DAMAGE CAUSED BY THE WHEELS OF INSTRUMENT
TROLLEYS.
The sensor cable should not be exposed to excessive
mechanical stress. Whenever disconnecting the cable, hold
the plug and not the cable. Store the cable in such a way as to
prevent anyone stumbling over them or any damage being
caused by the wheels of instrument trolleys.
The cable can be wiped with soapy water. Sterilization, if
required, should be done with gas only and not with steam.
To disinfect, wipe the cable with hospital standard disinfectant.
Care & Maintenance
WARNINGS: ONLY THE SENSOR HANDLE AND CABLE CAN BE CLEANED - DO NOT ATTEMPT TO CLEAN THE DISPOSIBLE
MOUTHPIECE.
DISCONNECT THE SENSOR FROM THE UNIT BEFORE CLEANING. DO NOT, UNDER ANY CIRCUMSTANCES,
IMMERSE THE APPARATUS INTO A CLEANING LIQUID OR STERILIZE WITH HOT WATER, STEAM, OR AIR.
Cleaning the Thermal Print Head
If the printer is used a lot, a residue of printers ink ( from
the grid on the paper) can build up on the print head.
This can cause the print quality to deteriorate. We
recommend therefore that every month the print head is
cleansed with alcohol as follows:
Remove the paper tray. The thermal printhead is found
under the paper tray release catch.
With a tissue dampened in alcohol, gently rub the
printhead to remove the ink residue. If the printhead is
badly soiled, the colour of the paper grid ink (i.e. red or
green) will show on the tissue.
Cleaning the Sensor Assembly
The sensor casing can be cleaned with a soft damp cloth on
the surface only. Where necessary a domestic non-caustic
cleaner can be used for grease and finger marks.
Cleaning the Sensor Cable
ALIGN THE SENSOR CABLE IN SUCH A WAY AS TO
PREVENT ANYONE STUMBLING OVER IT OR ANY
DAMAGE CAUSED BY THE WHEELS OF INSTRUMENT
TROLLEYS.
The sensor cable should not be exposed to excessive
mechanical stress. Whenever disconnecting the cable, hold
the plug and not the cable. Store the cable in such a way as to
prevent anyone stumbling over them or any damage being
caused by the wheels of instrument trolleys.
The cable can be wiped with soapy water. Sterilization, if
required, should be done with gas only and not with steam.
To disinfect, wipe the cable with hospital standard disinfectant.