54
Repair Procedures
Welch Allyn Micropaq Monitor
3.
Press the rubber cushions onto the display, with the raised cushion corners up as
shown.
4.
Install the display in the front case using the procedure below.
a.
Lower the rubber cushions closest to the connectors into the front case.
b.
Carefully slide the display underneath the soldered connections.
c.
Press the rubber cushions farthest from the connectors into place.
5.
Carefully bend the display flex cable so that it curves back toward the circuit board, as
shown in the diagram below. The curve will follow the curve of the front case.
Caution
Failure to follow the sequence below may result in damage to the
display—the soldered connections next to the display may scratch the delicate
flex cable circuitry.
Step a
Step b
Step c
