Welch Allyn Hillrom H12+, Руководство пользователя

Страница: 36 / 51

USING THE RECORDER
32
Displaying ECG Leads
DISPLAY ECG is used to visually inspect leads I, II, III, V1, V2, V3, V4, V5, and V6 before
starting a recording. Check the signal quality and ECG amplitude for each lead.
From the main menu, scroll to DISPLAY ECG, press Enter.
Lead I is the first lead displayed on the screen. Scroll from lead to lead. After visual verification of all
leads, press
Enter to return to the main menu.
7. To enter the patient ID, scroll through the main menu until ENTER ID is displayed, press Enter .
NOTE: When Patient ID entry has been performed at the HScribe system and saved to the SD
card, you will not be prompted with “Enter ID”. The patient ID number will be displayed.
NOTE: Unsupported characters are displayed as a question mark (?)
Entering Patient ID
ENTER ID is used to enter the patient ID in the patient record before starting a recording.
Press
Enter to select.
To enter the patient ID, the cursor is moved to the
desired letter or digit in the alphanumeric table and
then selected by pressing
Enter .
The cursor is initially located in the upper-left corner
of the screen over the number ‘0’. To move the
cursor one letter or digit to the right on a line, press
Up/Right . When the cursor reaches the end of the
line, the cursor wraps to the beginning of the line.
To move the cursor down one line, press Down . If the cursor is on the bottom line, pressing Down
moves the cursor to the top line.
To enter a space, move the cursor to the last line and position the cursor over the blank space
following the last letter. Press
Enter .
To delete a letter or digit, position the cursor over Del on the bottom line. Press Enter to delete the
last letter or digit entered. To end entry, position the cursor over End on the bottom line, press the
Enter to end and save.
NOTE: When entering the patient ID, the Up/Right key is used to move the cursor to the right.
The cursor cannot be moved in the left or up direction.