Welch Allyn 35900-NP-TE Скачать руководство пользователя страница 61

Страница: 61 / 71

Category

Feature

Implementation

Antenna

Internal, chip antenna

Max. gain 0.5dBi

Environmental

Operating temperature

-40 °C to +85 °C

Operating voltage

2.7V to 3.6V

Approvals

FCC/IC/CE/MIC/KC

/TRA

Qualified

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in

all EU member states and EFTA countries, except in

France

and

Italy

where restrictive

use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in

order to obtain authorization to use the device for setting up outdoor radio links and/or

for supplying public access to telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in

France

and in some

areas the RF output power may be limited to 10 mW EIRP in the frequency range of

2454 – 2483.5 MHz.

For detailed information, the end-user should contact the national spectrum authority in

France.

Norway

— Do not operate the OAE wireless function in the geographical area within a

radius of 20 km from the center of Ny-Ålesund

United Arab Emirates

— TRA registered No.: ER56177/17

TRA dealer No.: DA44647/15

Directions for use

Appendices 57

Содержание 35900-NP-TE








































































Результаты поиска

Содержание 35900-NP-TE

Отзывы:

Welch Allyn 35900-NP-TE, Инструкция по применению, Страница: 61 / 71

Результаты поиска

Содержание 35900-NP-TE

Отзывы: