Welch Allyn 35900-NP-TE Скачать руководство пользователя страница 21

Страница: 21 / 71

Change the clock mode

The Clock Mode menu enables you to change the clock from a 24 hour mode to a 12

hour mode.

1. See "Access menus" for how to access menus.
2. On the control panel, press the

DOWN

button to advance to the

CLOCK MODE

menu.

3. Press either the

LEFT

RIGHT

control panel button to change from the 12 to 24

hour mode or from the 24 to 12 hour mode.

4. Press the

control panel button repeatedly to return to the MAIN menu.

Change the date and time

1. If the date and time are correct, press the

control panel button to return to the

main menu. If either the date or time are not correct, go to

Step 2

2. If the month is incorrect, from the Main menu press the

DOWN

control panel button

three (3) times to advance to the Month menu.

3. Press the

LEFT

RIGHT

control panel button to advance to the correct month.

4. Press the

DOWN

control panel button to advance to the Day menu

5. Press the

LEFT

RIGHT

control panel button to advance to the correct day.

6. Continue Steps 4–5 to correct the year, hour, and minute settings.
7. When the year and hour settings are correct, press the

control panel button

repeatedly to return to the Main menu.

8. If you are at the Minute menu, press the

DOWN

control panel button to return to the

Main menu.

Directions for use

Setup 17

Содержание 35900-NP-TE








































































Результаты поиска

Содержание 35900-NP-TE

Отзывы:

Welch Allyn 35900-NP-TE, Инструкция по применению, Страница: 21 / 71

Результаты поиска

Содержание 35900-NP-TE

Отзывы: