Welch Allyn 35900-NP-TE Скачать руководство пользователя страница 12

Страница: 12 / 71

OAE functionality

Item number

Description

Probe connector

Test status indicators

Charge status indicator

Control panel

Micro-USB Connector

Display

The system consists of the screener, probe, printer, single-use eartips, replaceable probe

tubes, and other accessories. The screener contains the hardware and software for

generating the test stimuli, measuring and displaying the OAEs, and storing the results

until they are printed. The plastic housing contains circuit boards that provide the signal

processing and display the test results.

The screener also contains a rechargeable lithium-ion battery. The screener displays the

test status using a liquid-crystal display (LCD) and three light-emitting diodes (LEDs). You

control testing, printing, and test protocol resets using four keypad push buttons.

The probe contains the speaker and microphone which produce test stimuli and measure

the sound pressure level (SPL) present in the sealed ear canal. Interface of the

instrument to the ear canal is accomplished through disposable eartips which fit onto the

probe tube. The disposable eartips are color coded by size for easy selection.

8 Introduction

Welch Allyn

OAE Hearing Screener

Содержание 35900-NP-TE








































































Результаты поиска

Содержание 35900-NP-TE

Отзывы:

Welch Allyn 35900-NP-TE, Инструкция по применению, Страница: 12 / 71

Результаты поиска

Содержание 35900-NP-TE

Отзывы: