11
Microwave service manual – Model:
microMD UK
Remove the screws on both side. Take out the
whole baseplate assemble.
12. Stirrer assembly removal
Remove the second magnetron first.
10. High voltage transformer removal
1) Discharge the high voltage capacitor.
2) Disconnect the leadwire from magnetron, high
voltage transformer, and capacitor.
3) Remove the screw holding the high voltage
transformer to the baseplate.
1) The inner cover needs to be removed to repair
the bottom stirrer assembly.
2) The inner cover is fixed in the cavity by glue.
Once it was removed, it needs to be glued again.
(It is not recommend to do this).
3) Take out the top cover inside the cavity to repair
the top stirrer assembly.
INNER COVER
Number 11 is missing!)
