Welbilt C4 EB 12.20, Руководство по установке, Страница: 68 / 120

6.7 Installing the grease collecting canister
6.7.1 Connecting the grease collecting canister
Accessories required
The ConvoGrill is supplied with the following original accessories, which you need to use in order to connect the automatic
grease removal system. Use solely these original accessories:
■
Connecting tube with screw cap for screw-fitting on canister
■
Grease collecting canister (empty canister for receiving extracted grease)
■
Hose clip for securing the connecting tube on the combi oven.
■
Forked bracket for holding the canister screw-cap and connecting tube while the grease collecting canister is being emp-
tied and cleaned.
Connecting the grease collecting canister (ConvoGrill)
1.
Check the accessories for damage, and only continue with the installa-
tion if all the parts are intact and leak-tight.
2.
Plug the bare end of the connecting tube (2) of the automatic grease
collecting system onto the outlet pipe (1) at the back underneath the
combi oven, and secure the tube (2) with the hose clip (3).
3.
Screw the canister screw-cap (4) attached to the connecting tube (2)
onto the grease collecting canister (5).
4.
Place the grease collecting canister (5) in a suitable position and make
sure there are no kinks in the connecting tube (2).
5.
Fix the forked bracket (6) within reach of the outlet pipe (1). This
bracket will be used to hold the canister screw-cap (4) and connecting
tube. To fix in place, use the double-sided adhesive tape on the back
of the bracket or the pre-drilled holes in the bracket.
For appliances with a disappearing door:
Do NOT position the bracket (6) on that side of the combi oven along-
side which the appliance door slides back.
Installation position for the grease collecting canister
Install the grease collecting canister in accordance with the following requirements:
■
The canister must be positioned upright and with easy access beside the appliance on a flat surface.
■
The surface on which the canister sits must not lie more than 15 cm above the surface supporting the appliance.
■
The user's work area must not be obstructed.
6 Installation
Installation manual 68