User manual
TAXI-CHECK – V1.3
- 14
-
4.0 Hardware Setup Menu Options
This menu contains options used for viewing and/or setting up system
specifications. These options should not need to be accessed during regular
operation.
Use the
DOWN
or
UP
key to rotate through the menu until the desired option is
displayed on line 3 with the arrow
( )
pointing to it, then press the
ENTER
key.
Press the
CLEAR
key to return to the main menu.
Hold down the
CLEAR
key to return to the main screen.
4.1 Set rf channel
Channels 0-9 are available and allow multiple systems to be used
within the same vicinity. A different channel may also be required due
to external interference.
Use the
DOWN
or
UP
key to modify the value, then press
ENTER
to
store and return to the hardware setup menu.
To exit without any modification, press the
CLEAR
key.
Warning:
The set channel on the meter must always match the
set channel on the roller bed electronics to operate.
4.2 Set rf power
Used to set the range that the meter can communicate to the roller
bed from. Also can help overcome external interference problems
and may be needed when setting up multiple systems within the
same vicinity.
Use the
DOWN
or
UP
key to modify the value, then press
ENTER
to
store and return to the hardware setup menu.
To exit without any modification, press the
CLEAR
key.
MENU LISTING:
1. Set rf channel
2. Set rf power
3. Contrast adjust
4. Backlight adjust
5. Set time / date
6. Battery status
7. Auto power off
8. Set user name
9. Calibration
10. Base unit specs
- HARDWARE SETUP -
2. Set rf power
1. Set rf channel
10. Base unit specs
- SET RF CHANNEL -
Channel: 0
- SET RF POWER -
Power: 10mW
Line 1:-
Line 2:-
Line 3:-
Line 4:-
