WEKA_IOM_C-0068_TgxV_DN250_PN6_EN / 17.04.2020
28 / 38
4
Slightly grease the o-ring with vacuum grease.
Assemble the o-ring.
5
Assemble the insert in the housing.
Lift the insert using a crane mounting tool.
Special tools can be purchased from WEKA
AG. (WEKA-no. 2838)
Attention
Carefully move the insert into the
housing and guide it with one
hand! Damage to the flow plug or
other parts must always be
avoided.
6
Carefully lift the transport protection device
with WEKA-no. 46933 (blue marked) over the
insert.
Please note:
During this step, make sure that
the insert spindle is not scratched.
7
Slightly grease the o-ring with
vacuum grease.
Assemble the o-ring
Carefully lift the entire unit (blue marked) over
the insert and move it back down.
Please note:
During this step, make sure that
the insert spindle is not scratched.
