
6
EN
INSTRUCTIONS FOR USE - DIAMOND DRILL RIG KS 50
Please read carefully before putting the drill rig into operation!
W ith the W EKA drill rig, you own an outstanding quality product with which you will be very satisfied,
provided you use it properly.
1.
G E N E R A L S A F E T Y P R E C A U T I O N S
WARNING! Read all safety precautions and instructions.
Failures in the compliance with
these safety precautions and instructions can cause electric shock, fire and/or heavy injuries.
Please keep these safety precautions and instructions for the future.
1)
Security of employment
a)
Keep your working area clean and well illuminated.
Disorder or unilluminated
working areas can cause accidents.
b)
Keep children and other persons away from the electric tool while using it.
W hen
being distracted, you can lose the control on the device.
2)
Personal safety
a)
Be attentive, pay attention to what you do and go to work with the electric tool
with reason. Do not use an electric tool when you are tired or under the influence
of drugs, alcohol or pharmaceuticals.
One moment of carelessness while using an
electric tool kann cause serious injuries.
b)
Wear personal protective equipment and always goggles.
The wearing of personal
protective equipment, like dust mask, skid-proof shoes, protection helmet or hearing
protection, depending on the kind and use of the electric tool reduces the risk of
injuries.
c)
Avoid abnormal posture. Care for safe standing and keep the balance anytime.
Thus you can control the electric tool better in unexpected situations.
d)
Wear suitable clothing. Do not wear wide clothing or jewelry. Keep hair, clothing
and gloves away from moving parts.
W ide clothing, jewelry or long hair can be
caught by moving parts.
e)
If there is the possibility to assemble a dust exhauster and collecting device,
make sure that these are connected and used correctly.
The use of a dust
exhauster can reduce dangers by dust.
3)
Use and handling of the device
a)
Do not overload the device.
b)
Maintain the device with care. Check if movable parts function correctly and do
not jam, if parts are broken or damaged in that way, that the function of the
device is affected. Have damaged parts repaired before using the device.
Many
accidents originate from bad maintained devices.
c)
Keep the cutting tool sharp and clean.
Carefully maintained cutting tools with sharp
edges do jam less and are easier to guide.
d)
Use device, accessory, operation tools, etc. according to these instructions.
Thereby consider the conditions of employment and the work to be done.
The use
of devices for others than the intended task can result in dangerous situations.
4)
Service
a)
Have your tool only repaired by qualified personnel and only with original spare
parts.
Thus it is assured that the safety of the electric tool is being obtained.
Содержание KS50
Страница 2: ......
Страница 64: ...61 RU KS 50 1 1 a b c 2 a b c d e f g 3 a b...
Страница 67: ...64 4 3 1 4 4 5 5 1 5 2 8 4 M8x25 10 9 9 12 350 10 M8x105 10 9 5 3 22 26 31 27 5 4 12 1 2 5 5...
Страница 69: ...66 9 2002 96 EG nderungen vorbehalten 4210...