Weka KS50, Инструкция по эксплуатации, Страница: 10 / 74

7
2. S P E C I A L S A F E T Y P R E C A U T I O N S - Please note!
This drill rig is intended for commercial use only. It may only be used by trained personnel.
It is intentional used as a stand for fixing diamond core drill for drilling rock, concrete and masonry.
For operation the relevant regulations have to be observed.
3. T E C H N I C A L D E S C R I P T I O N
The KS 50 is a drill rig which is meant for fixing diamond core drills. The diamond drill rig can be fixed
to the ground and to the wall by means of dowels, vacuum or quick bracing columns. The KS 50 is
best suitable for the W EKA diamond core drills DK 32, SR 35, DK 42, and DK 52.
The core drill exists of a eletric motor with step-down gear. Via the quick connect nipple water is
supplied directly to the drilling tool (diamond core bit) (21). Thus the cutted material is flushed away
and the tool is cooled (wet drilling).
The drilling tool (diamond core bit) (21) is a hollow drill (tube) which is fitted with soldered-on or
welded-on segments impregnated with diamonds.
In the wet use, if necessary, the flushing water is extracted through a water collecting ring (23) by
means of an all-purpose suction unit.
Avoid wet drilling upwards (overhead drilling) (Überkopfbohrungen). If it is
indispensable use a proper working water collecting ring.
3.1 Technical data
Type KS50 KS50E KS50 S KS50 ES
Total length mm 1030 1030 1030 1030
Drill stroke mm 630 630 630 630
Core bit diameter max. mm 500 500 500 500
Inclination deg 45 - 45 -
Machine fixture Quick change plate
Rig foot (LxB) mm 425 x 280 425 x 280 475 x 387 475 x 387
W eight (without feed wheel) kg 19,5 18,5 21 20,5
3.2 Scope of delivery
KS50 - Drill rig (1), with brace (5), column head (4), fine feed (11), swing foot kit (7),
wheel kit (6), feed wheel (12), operators manual
KS50 E - Drill rig (1), with head plate and chuck head (15), operators manual
KS50 S - like drill rig KS50, but with steel foot, operators manual
KS50 ES - like drill rig KS50 E, but with steel foot, operators manual
Accessories - Distance plate (10), Vacuum adaptor (28), water collection ring (23), machine
adaptor (8)
4. P R E P A R A T I O N
Make sure that the drill rig has not been damaged during transport. Check if all components are at
hand.
4.1 Fixing the drill rig
The drill rig can depending on the surface of the underground be fixed with dowels, vacuum or a quick
bracing column.