Shenzhen Weistek Technology Co., Ltd. www.weistek.net
9
2.3 Print Head Installation
Take out print head set and tools. Stuck print head in sliding rail, aim screw hole which is on the bottom of
print head to the screw hole on stuck piece of sliding rail, install screw from the bottom, as shown below.
Take out print head set and tools. Stuck print head in sliding rail, aim screw hole which is on the bottom of
print head to the screw hole on stuck piece of sliding rail, install screw from the bottom, as shown below.
Tighten up screws and fix print head. Remove print head cover, as shown below.
Use both hands to insert print head cable into location as shown below. Stuck cable inside of cover and
fasten cover. Installed print head is shown as below.
