Shenzhen Weistek Technology Co., Ltd. www.weistek.net
22
9.3.2 Turn Z-axis clockwise and slowly, make build bed touch the limit switch of Z-axis (on upper left
of build bed), stop when you hear a sound of “ka”, as shown below.
9.3.3 Examine distance between nozzle and build bed, if the nozzle is too further or closer to the build
bed, adjust screw which is under build bed and form soft touch between build bed and nozzle
【
about
as thick as a piece of A4 paper
】
, as shown below.
