© 2021 WEINZIERL ENGINEERING GmbH
Seite 9/20
5.2 KNX IP Interface 740.1 wireless is
“Station / Client Mode”
The KNX IP Interface 740.1
wireless
automatically setting up the Wi-Fi connection to the
configured access point, provided the entered data is correct. The data is entered via the ETS
parameter dialog. See the section
“ETS database – Operating mode “Station / Client-Mode””.
If configured, the connection can also be established via WPS. For this, the parameter
WPS (Wi-Fi
protected setup)
must be set to Temporary or Permanent. To connect, the WPS functions must
first be activated on the access point and then the button Test
❺
on the KNX IP Interface 740.1
wireless
must be pressed for a long time (at least 1 second). The interface must be in normal
operating mode (LED Run
❷
lights up green).
After the Wi-Fi connection has been established, the KNX IP Interface 740.1
wireless
can be used
as an interface to the KNX bus. This applies to all PCs and laptops in this network.
6 Interface settings in the ETS
6.1 ETS 5
In the ETS 5, interfaces can be selected and configured via the ETS menu
“Bus – Interfaces”. All
available connections are listed under
“Discovered Interfaces”. After clicking on the desired
connection, connection specific information and options appear on the right side of the ETS
window. The selected connection can be selected as the
“Current Interface” via the “Select” button.
