Weinzierl 5419 Скачать руководство пользователя страница 19

Страница: 19 / 20

Seite 19/20

8.6 Operating mode

“Station / Client-Mode”

SSID of remote access point (32 characters)

Here the identifier of the Wi-Fi network (SSID, Service Set Identifier) to which the device is to
connect has to be entered.

Authentification

The Authentification parameter can be used to configure whether the remote access point uses
Wi-Fi encryption.

The choices are:

▪

None

The Wi-Fi is not encrypted.

▪

WPA2-PSK

As encryption standard WPA2-PSK (Wi-Fi Protected Access 2, pre-shared-key) is used.

Key (only for WPA2-PSK, 63 characters)

The key used must be entered here (8 ... 63 characters). This is required to establish the Wi-Fi
connection to the remote access point.

WPS (Wi-Fi protected setup)

This configures whether the device can connect to the remote access point using WPS (Wi-Fi
protected setup).

The choices are:

▪

Disabled

▪

Temporary

▪

Permanent (save access data in device)

The WPS function overwrites the authentification settings.

Содержание 5419





















Результаты поиска

Содержание 5419

Отзывы:

Похожие инструкции для 5419

Бренды по названию

Популярные бренды

Weinzierl 5419, Руководство по эксплуатации и установке

Результаты поиска

Содержание 5419

Отзывы:

Похожие инструкции для 5419

Бренды по названию

Популярные бренды