weinor BiEasy 1M, Руководство по эксплуатации

Страница: 8 / 10

© weinor GmbH & Co. KG 14 | EN © weinor GmbH & Co. KG EN | 15
Intermediate positions of the blinds
Roller shutter Awning Venetian
blind Interior
shading
Pos ▼ Intermediate
position Intermediate
position Intermediate
position Intermediate
position 1
Pos ▲ Ventilation
position -- /fabric ten-
sioning Tilting posi-
tion Intermediate
position 2
Programming the intermediate position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is in thetop end
position.
1. Move the blind to the required position using the DOWN button.
In doing so, keep the DOWN button pressed.
2. Also press the STOP button. The blind stops. The status display
lights brie fl y.
The intermediate position is programmed.
Programming the ventilation/tilting position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is at its lower end
position.
1. Use the UP button to move the blind in the UP direction until
the ventilation gaps open or the slats turn. Keep the UP button
pressed during the movement.
Approaching end positions of roller shutter /
awning / Venetian blind
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set.
Approaching bottom end position (roller shutter/awning)
Press the DOWN button brie fl y. The blind moves to the bottom end
position/the awning extends completely.
Approaching the lower end position (Venetian blind)
Press the DOWN button until the status display lights brie fl y. The
blind approaches the lower end position.
Press the
DOWN button only brie fl y (Inching for JA, pulsed
operation for Combio Pulse) and the blind moves a short distance
and stops again.
Approaching top end position (roller shutter/awning)
Press the UP button brie fl y. The blind approaches the upper end
position/the awning retracts.
Approaching the upper end position (Venetian blind)
Press the UP button until the status display lights brie fl y. The blind
approaches the upper end position.
Press the
UP button only brie fl y (Inching for JA, pulsed operation
for Combio Pulse) and the blind moves a short distance and stops
again.
Explanation of functions
0800 328 6250 www.samsondoors.co.uk
0800 328 6250 www.samsondoors.co.uk