WEIHONG Ncstudio Phoenix, Руководство пользователя

Страница: 31 / 65

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
28 / 61
4.4 Starting Machining
Select one from the following methods to start machining:

Press the F9 key.

In the operation button bar, click .

In the menu bar, go to Machine > Cycle Start .
After machining is started, the following functions are supported:

To pause machining, select one from the following methods:
o
Press the F10 key.
o
In the operation button bar, click .
o
In the menu bar, go to Machine > Cycle Pause .

To stop machining, select one from the following methods:
o
Press the F11 key.
o
In the operation button bar, click .
o
In the menu bar, go to Machine > Cycle Stop .

To resume machining from the interrupted position in case of power-off, emergency
stop, or other exception, select one from the following methods:
o
Press the F12 key.
o
In the operation button bar, click .
o
In the menu bar, go to Machine > Resume .