WEIHONG Ncstudio Phoenix, Руководство пользователя

Страница: 11 / 65

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
8 / 61
and turn the handwheel knob by a certain degree to make the target
axis move in the target direction.

Stepping : Select 0.01, 0.05, 0.1, 0.5, 1, 5 , or 10 (the unit is mm), or
enter a value in the blank field. Click and release an axis button to
make the target axis move in the target position by the set step.
Note : Please do not set the step to a value that's too large to avoid
damage due to misoperation, and do not click an axis button too
frequently in short time.
o
Common function: Going to the fixed point
o
Common ports: Spindle, Cool, Vacuum, Lube , etc. The common ports can
be modified in NcConfig.

Homing
o
Tick Execute homing when software starts to make the axes go to the
mechanical origin upon software start.
o
You can also check and clear the homing average values in this area.
1.3.3.8 Operation Button Bar
You can use the following functions with buttons in the operation button bar:
In Auto and Manual modes:

Loading and unloading of programs

Axis clearing

MDI, selective machining, going to the workpiece origin, and simulation

Using the handwheel to control machining movement

Starting, pausing, or stopping machining; resuming machining from the interrupted
point
In Homing mode:

Making the axes go to the mechanical origin

Starting, pausing, or stopping machining; resuming machining from the interrupted
point