background image

 

- 2 -

Overview 

Weidmüller Media Converter, which is specially designed for reliable 
and stable operation in harsh industrial environments, provides 
industrial grade media conversion between 10/100BaseT(X) and 
100BaseFX. The IE-MC-VL Series reliable industrial design is 
excellent for keeping your industrial automation applications running 
continuously, and comes with a relay output warning alarm to help 
prevent damages and losses. 

This product is available in an operating temperature range from 0 to 
60°C or -40 to 75°C, and is designed to withstand a high degree of 
vibration and shock. The rugged hardware design makes IE-MC-VL 
Series perfect for ensuring that your Ethernet equipment can 
withstand critical industrial applications, such as in hazardous 
locations (Class 1 Division 2/Zone 2), and complies with FCC, TÜV, 
UL, and CE Standards. 

 

Package Checklist 

Weidmüller Media Converter is shipped with the following items. If any 
of these items is missing or damaged, please contact your customer 
service representative for assistance.

 

y

  Weidmüller Media Converter 

y

  Hardware Installation Guide 

 
 

Features 

y

  Supports 10/100Base-TX auto-negotiation and auto-MDI/MDI-X 

y

  Multi mode, single mode with SC or ST fiber connector available 

y

  Supports Link Fault Pass-Through 

y

  Relay Output alarm when a port breaks or the power fails 

y

  Redundant 24 VDC (12 to 45 VDC) power inputs, DIN-Rail or panel 

mountable 

y

  Operating temperature range from 0 to 60°C (optional with 

extended operating temperature from -40 to 75°C) 

 

Содержание IE-MC-VL















Отзывы: