Stripping and crimping machine
Crimpfix 2.5 M
08-09-19-DK-Operating Manual_gb.doc / 2008-09-19
5
3.5
Symbols and indications
Before switching on the machine, read through the operating manual carefully.
Use the machine only at dry places.
Caution!
This symbol indicates a possible hazardous situation.
Failure to observe these warnings could result in moderate injuries or property damages.
3.6
Training of personnel
•
Only trained and qualified personnel are allowed to handle the machine.
•
The responsibilities of the personnel for operating, changing tools and maintaining must defined.
•
Only the manufacturer or authorized service workshops are entitled to repair these products.
3.7
Special obligations of the person in charge
•
Knowledge about local regulations for safety and accident prevention.
•
To take care that all safety and danger indications are clearly visible, replace them if necessary.
•
To inform the manufacturer immediately if the machine and the application becomes unsafe.
•
To change machine parts in defective condition immediately.
•
To use only original spare and wear parts.
•
Modifications or conversions at the machine require written approval by the manufacturer.
3.8 Using
risks
•
Operate the machine only when all safety system are fully functional.
•
The operator is only allowed to clear faults on which the cover does not have to be removed.
•
Only trained and qualified personnel are allowed to open the cover and to do maintenance or repair.
•
Before opening the machine and changing spare parts remove the plug.
4. Transport
•
Use always the complete original packaging for transports.
•
For service and repair work the machine must be sent with all accessories.
•
Before returning the machine, empty the stripping-waste container.