Stripping and crimping machine
Crimpfix 2.5 M
08-09-19-DK-Operating Manual_gb.doc / 2008-09-19
15
11. Trouble
shooting
See chapter 3.8. Using risks
Trouble Elimination
Double crimp
See Jammed wire
Jammed wire
Remove the Magazine.
If there is a ferrule in the crimping tool, take it away.
Remove the feeding funnel.
If the feeding funnel is not removable:
3x
M.Motor
E
5s Confirm
→
manual operation
or
Move carefully stepwise forwards or backwards
until the feeding funnel is removable.
C
Starting position
Take out stripping waste.
Insert the feeding funnel and fix it.
E
Exit and back to the operating menu
Insert in the magazine.
Not able to put in a cable
Holding clamps are not in starting position
Remove the magazine
3x
M.
Motor
E
5s Confirm
→
manual operation
C
Starting position
E
Exit and back to the operating menu
Insert in the magazine.
Machine is not starting
Machine is not in operating mode
Remove the magazine
3x
M.
Motor
E
5s Confirm
→
manual operation
Insert wire
Starting switch S1 is triggered (*) or damaged.
C
Starting
position
E
Exit and back to the operating menu
Insert in the magazine.
Wire is not stripped correct
Stripping depth is not adjusted correctly.
See chapter 9.2 Adjusting Stripping Depth
Single strands are cut
Stripping depth is not adjusted correctly.
See chapter 9.2 Adjusting Stripping Depth