Weider Pro 8000, Руководство пользователя

Страница: 23 / 44

23
66. Attach the Left Backrest (33) to the Backrest
Frame (27) with two M6 x 16mm Screws (85), an
M6 x 35mm Screw (139), and an M6 Washer
(132).
Slide the Backrest Frame (27) into the Left
Upright (5). Engage the Knob (121) into the
Upright and Backrest Frame, and turn it clockwise
until it is tight.
66
33
85
5
27
121
139
132
67. Attach the Lock Plate (80) to the Right Seat
Frame (9) with an M8 x 69mm Shoulder Bolt (87),
an M8 Washer (117), and an M8 Nylon Locknut
(115). Do not overtighten the Locknut; the
Lock Plate must be able to pivot easily.
Attach the Leg Pin (83) to the Right Seat Frame
(9) with an M4 x 16mm Self-tapping Screw (113).
Insert the Leg Pin through the Lock Plate (80)
and the Leg Lever (11).
67
117
115
80
9
87
83
113
11
68. Slide the Pad Tube (31) through the Right Seat
Frame (9). Slide two Small Foam Pads (32) onto
the Pad Tube. Press two Foam Caps (58) into the
Pad Tubes.
Repeat this step with the Leg Lever (11).
69. Attach the Knee Pad (30) to the Dip Assist (21)
with four M6 x 16mm Screws (85).
68
69
85
85
21
30
58
32
32
58
31
9
11