6
1.
Before assembling this product, make sure you
have read and understand the information in the
box above.
Press a 1 3/4” Thin Square Inner Cap (39) into the
indicated end of the Bench Frame (5).
Attach the Bench Frame (5) to the bracket (A) on the
Front Leg (4) with three M8 x 16mm Bolts (19) and
three M8 Washers (55).
Do not tighten the Bolts yet.
1
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• For help identifying the small parts, use the PART
IDENTIFICATION CHART on page 5.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
• Two (2) adjustable wrenches
• One (1) rubber mallet
• One (1) standard screwdriver
• One (1) phillips screwdriver
• Lubricant, such as grease or petroleum jelly
plus soapy water.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.
Assembly
Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that the assembly of our products can be complet-
ed successfully by anyone. However, it is impor-
tant to recognize that your new equipment is a
sophisticated product with many small parts and
consequently, the assembly process will take
time. Most people find that by setting aside plenty
of time, and by deciding to make the task enjoy-
able, assembly will go smoothly.
19
5
55
19
4
39
55
19
A
2.
Insert an M8 x 55mm Carriage Bolt (47) through the
front hole in each Base (6, 7). Slide the mounting
bracket (B) on the Bench Frame (5) onto the Carriage
Bolts. Partially tighten an M8 Nylon Locknut (40) onto
each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Insert two M8 x 60mm Bolts (42) through the mount-
ing bracket (B) on the Bench Frame (5) and the Left
and Right Bases (6, 7). Partially tighten an M8 Nylon
Locknut (40) onto each Bolt.
Do not tighten the Nylon Locknuts yet.
2
40
42
5
47
40
7
6
B
