13
ATTACHING WEIGHTS TO THE WEIGHT CARRIAGE
To use the Lat Tower (1), slide the desired amount of
weight (not included) onto the weight tube (F) on the
Weight Carriage (2). Secure the weights with the Spring
Clip (53).
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (3), first make sure the Weight Stop
(21) is on the Weight Tube (20). Then slide the desired
amount of weight onto the Weight Tube.
WARNING: Do not place more than 130 pounds on
the weight carriage.
WARNING: Do not place more than 130 pounds on
the leg lever.
53
2
1
3
F
20
21
ADJUSTING THE WEIGHT RESTS
To change the height of the Weight Rests (11), first
remove your barbell from the Weight Rests. Then
remove the Long Adjustment Knob (25) from the Weight
Rest in one Upright. Position the Weight Rest at the
desired height or turn it around if needed. Align the holes
in the Weight Rest and the Upright. Secure the Weight
Rest with the Long Adjustment Knob. Make sure that
you fully tighten the Long Adjustment Knob.
Position the other Weight Rest in the same manner. Both
Weight Rests must be set at the same height.
WARNING: Always set both weight rests at the
same height. The long adjustment knob must
always be inserted through both the weight rest
and upright and firmly tightened. Never tighten the
long adjustment knob into an upright and then set
a weight rest in the upright on top of the long
adjustment knob.
11
11
25
