10
15. Press a 2 1/4” Square Bushing (58) into the top and
bottom of the Weight Carriage (2).
Press a 1” Round Inner Cap (30) into the end of the
weight tube (F) on the Weight Carriage (2).
Slide a Weight Stop (21) onto the weight tube (F).
Press a 2 1/4” Square Bushing (58) into the top of the
Carriage Stop (37).
15
30
58
2
F
21
58
16
16. Slide the Weight Carriage (2) onto the Lat Tower (1).
Make sure the Weight Carriage is oriented as
shown.
Slide the Carriage Stop (37) onto the Lat Tower (1).
Make sure the 2 1/4” Square Bushing (58) is fac-
ing the Weight Carriage (2).
Align the holes in the Carriage Stop (37) with the indi-
cated holes in the Lat Tower (1). Attach the Carriage
Stop to the Lat Tower with an M8 x 70mm Bolt (38)
and an M8 Nylon Locknut (40).
Align
These
Holes
2
40
1
38
37
58
58
37
14. Attach the Curl Pad (24) to the Curl Post (10) with
two M6 x 16mm Screws (45).
Slide the Curl Post (10) into the Storage Post (27).
14
27
24
45
10
45
