12
Before using the WEIBANG WBSC457LC Professional Sod cutter, please perform the following
procedures for the personal and property safety of the operator and jobsite and for optimal
performance.
1). Before operating the sod cutter ensure that it is structurally and mechanically safe by checking
the following:
a. Perform a detailed visual inspection on the machine with particular attention to the following:
i. Are there any loose, worn or damaged parts? If so, DO NOT ATTEMPT TO OPERATE THE
MACHINE. Make note of required parts, and contact your local dealer for replacement parts
and further assistance to service the unit PRIOR to any further use.
ii. Is the machine, particularly the blade part, clean and free of debris? Small rocks and other
foreign objects can jam machine and cause the unit to malfunction, leading to serious injury
to the operator and property damage on the jobsite.
iii. Are there any cracks or damage on the engine? Consult with the engine manufacturer's
manual for guidelines and instructions on service. DO NOT ATTEMPT TO OPERATE THE
MACHINE until engine is refurbished to engine factory standards.
iv. Is the blade part disengaged in the traveling state
(i.e: raised from the working surface)?
Ensure that the blade is securely raised away from the working surface until arrival at
jobsite. Moving the sod cutter with the blade in the lowered working position can damage
the unit and jobsite.
b. Inspect the handle for the following:
i. Is the handle properly and securely attached to the machine?
ii. Is the handle set in the correct operating position?
c. Consult the “Recommended Maintenance Schedule” section of this manual and verify that:
i. The wheels, zerks and carriage are lubricated and in good condition.
ii. The blade part is clean and not in need or replacement. Consult the “Maintenance and
Service” section of this manual for guidelines and instructions on when and how to change
the blade.
iii. The drive belt is in good condition and set to the appropriate tension. Consult the
“Maintenance and Service” section of this manual for guidelines and instructions on taking
care of the belt.
2). Before operating the sod cutter, perform the following environmental checks:
a. Is the ground where the sod cutter will be operating level and solid? If it is a slope of more
than 20% grade, please refer to “cutting sod on Inclined Surfaces” under the “Operation
Procedures” section of this manual.
b. Has the sod been cleared of debris such as string, wire, rocks, metal and other materials?
Such items could cause malfunction or damage to the sod cutter that could also be
potentially hazardous to the machine and operator.
c. Are all obstructions such as sprinkler lines, electrical boxes, fences etc. clearly marked?
If any of the above checks fail, please take necessary steps to maintain or repair the unit
before operating it in any environment.
CAUTION: Always wear proper safety clothing and equipment for the job. These can and
should include eye and ear protection, gloves, dust mask and any other items that are
appropriate for the job and jobsite requirements
