5
4.
Never leave machine unattended. Shut off the engine and shift the ignition switch to “OFF”
whenever you leave the work area.
5.
For engaging blade or selecting gears, reduce the throttle and pull the clutch
handle slowly until the transmission is semi-engaged to avoid damaging
gears.
6.
Do not engage the blade until the transmission is in neutral, FAILURE TO DO
SO MAY RESULT IN SERIOUS INJURY OR DEATH.
7.
The cutting work should be carried in low gear, fail to do so will damage the machine and
affect cutting effect.
●
DO NOT cutting sod when the machine is in high speed gear.
●
DO NOT use this machine at any other circumstances except lawn.
●
THIS MACHINE IS NOT DESIGNED FOR USE ON SLOPES OF MORE THAN 20% GRADE.
IF MACHINE IS USED ON EXTREME SLOPS, THE MACHINE MAY BECOME
UNBALANCED TO THE POINT OF PRESENTING THE DANGER OF ROLLING OVER.
●
Keep all hands or feet and all other personal parts away from moving parts of the machine.
●
Do not run this machine in unventilated areas.
●
Do not manually drive the machine until the gear is disengaged.
●
Do not attempt to perform any repairs, service, or diagnostics, or to transport or move the
machine until it comes to a complete stop. Disconnect cable from the sparkplug and place
where it cannot come in contact with plug
.
●
Do not run this machine until all guards and deflectors in place and in good working condition.
●
The sod cutter is a heavy unit. DO NOT ATTEMPT TO MANUALLY LIFT ALONE!
●
Do not select gears until the machine stops moving.
●
After gear selecting, accelerate the throttle slowly
●
Do not put down or lift up the blade until the driving system is disengaged.
Regular maintenance and parts replacement are important steps to extending the life of your
equipment and enjoying its optimum performance. When performing or conducting any
maintenance or repairs, always check that your working surroundings are safe and well-ventilated
and that the technician is familiar and comfortable with all aspects of the machine and required
procedures.
This guide aims to serve as a representational guide to the WBSC409H. Any other uses or
application beyond the scope of this document are strictly prohibited. While every attempt has
been made to maintain its accuracy
，
WEIBANG reserves the right to update and modify the
equipment without prior notification. Prior to undertaking to perform any maintenance or repair
procedures, please contact our Technical Support Hotline for clarification and to acquire
appropriate parts.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the power tool's construction and design:
1.Damage to lungs if an effective dust mask is not worn.
2.Damage to hearing if effective hearing protection is not worn.
3.Damages to health resulting from vibration emission if the power tool is being used over longer period of
time or not adequately managed and properly maintained.
Содержание SC409H
Страница 10: ...7...
