WEIBANG SC409H, Руководство оператора

Страница: 25 / 32

22
BY A TRAINED AND EXPERIENCED TECHNICIAN. Ensure that the work area is clean and free
of debris prior to starting any maintenance or service work. Small particles may become trapped
in key components that may lead to serious damage to the machine and cause severe bodily
harm to the operator or technician.
Use WEIBANG brand-name parts for compatibility and optimum performance. Use of
any other parts prior to consulting with your local dealer will void all warranties expressed herein.
10.3.2 Pre-maintenance
1
. When this equipment is stopped for servicing, inspection, storage, or to make adjustments,
make sure the spark plug wire is disconnected from the spark plug. Also, make sure the engine
has cooled down before you make any inspections, adjustments, etc.
2.
Use only original WEIBANG replacement parts. Parts from other manufacturers could be
dangerous during operation even though they may appear to fit properly.
3.
There are two grease zerks that need periodic greasing: there is one zerk located on the right
side bearing housing, and one on the left side bearing housing, (as viewed from behind
handlebars) grease these locations every 50 hours of use or as needed.
4.
Make certain all safety decals on this equipment are kept clean and in good condition. The
decals are shown (at reduced sizes) before. All decals are available for replacement except that
with the serial number of the unit for each number serves as an unique identifier for warranty and
support purposes. If you need a replacement decal, please call your dealer for re-ordering.
WARNING: Do not leave machine unattended or attempt any inspection or service unless
the engine is stopped. Remove spark plug wire from spark plug. Allow machine to come to
a complete stop.
General recommendations
The warranty on this sod cutter does not cover articles that have been subjected to operator
abuse or negligence. To maintain a complete coverage by the warranties provided, the operator
must maintain the sod cutter as instructed in this manual. For a proper maintenance of your sod
cutter, some adjustments will need to be made periodically. All adjustments in the Service
Adjustments section of this manual should be checked at least once each season.
●
Replace the sparkplug, clean or replace the air filter element and check blade(s) for wear once
very year. A new spark plug
，
and a cleaned or new air filter element, assures a proper air-fuel
mixture and helps your engine run better and last longer.
●
Observe the maintenance schedule in this manual.
WARNING: MAKE SURE DO CARRY OUT ALL MAINTENANCE AND SERVICE WORKS
WHILE THE ENGINE IS STOPPED.
10.3.3 Maintenance contents
BEFORE EACH USE
●
Check engine oil liquid level.
●
Check for loose screws, nuts, bolts or fasteners.