Wegener DTV742, Руководство пользователя

Страница: 18 / 50

DTV 742 User’s Manual
800057-01 Rev. B 18 wegener.com
Ethernet An Ethernet 10BaseT/100BaseT port is included and, along with an HTML
browser, is the primary user interface. The unit has a URL which is assigned
via the front panel. The “home” page can then be accessed via the Ethernet port
and an attached computer by entering the unit’s URL (web address) in your
browser’s address field. From this page, you can select desired channels and
monitor unit status.
SNMP MIB is available. Contact Customer Service (see page 49) for assis-
tance.
Terminal I/O The Terminal serial port is configured to 115.2k, N, 8, 1. The Terminal device
is used for factory testing and debugging of the DTV742. This I/O is a basic,
VT100-like emulation. User input text strings that are terminated in carriage-
returns prompt all I/O. The terminal should be set to local echo ON because the
DTV742 only echoes a carriage-return/linefeed and then a ‘>’ prompt after
entry of a command-line terminated in carriage-return.