Wegener DTV742, Руководство пользователя

Страница: 30 / 50

DTV 742 User’s Manual
800057-01 Rev. B 30 wegener.com
Following the Program box are the Major Channel , Minor Channel , and
Name boxes. These allow user selection of these items. The major and minor
channel numbers may be selected from 1 to 999 and the name may be up to
seven characters in length.
Finally Audio Mapping allows selection of AC-3, MPEG, or both AC-3 and
MPEG audio PIDs to be included in the output.
After all desired selections have been made, click Submit to activate the out-
put.
Set up Config Out 2, 3, and 4 in the same manner. When complete, return to
the Control & Status page to verify that the outputs appear as desired and that
no oversubscription condition exists (more data selected than the output data
rate can handle). If there is an oversubscription alarm, you must either increase
the data rate for the affected ASI output or remove one or more programs from
the output.
Q&A/Help
Page A list of questions and answers about operating your DTV742 is available on
the Q&A/Help page (Figure 3.6 below). Click the Q&A/Help tab to display
this page.
Figure 3.6 Q&A/Help Page