background image

English

21

espresso coffee machine - user instructions

•  The espresso coffee machine is intended for the preparation of hot beverages such as coffee, tea or warm milk. This appliance 

is to be used only for its intended purpose. Any other use is considered improper and therefore dangerous. The manufacturer 

cannot be responsible for any damage caused by incorrect and unreasonable use.

•  When using the electrical appliance, several safety standards must be observed :
 

-  do not touch the appliance when hands or feet are wet or damp;

 

-  do not use the appliance in bare feet;

 

-  do not use extensions in rooms where there are showers or baths;

 

-  do not pull on the power cord to disconnect the appliance from the power outlet;

 

-  do not leave the appliance exposed to atmospheric agents (rain, sun, etc.);

 

-  do not allow the appliance to be used by children or the disabled.

•  Before any maintenance, disconnect the appliance from the electrical mains through the main switch.
•  For daily cleaning, follow the instructions in this manual.
•  In case of breakdowns or poor functioning, turn off the appliance and unplug it. Do not attempt any repairs; call for specialised 

technical service.

•  Any repairs must be done only by the manufacturer or an authorised service centre using original spare parts only. If this require-

ment is not observed, the safety of the appliance is compromised and the guarantee becomes void.

•  The power cord of the appliance must not be replaced by the user. If the cord is damaged, turn the machine off and contact 

professionally qualified personnel only.

•  If you should decide not to use the appliance any longer, unplug it and have it drained of water by qualified personnel.
•  To guarantee that the machine is efficient and to keep it operating correctly, it is indispensable to follow the manufacturer's 

instructions, having periodical maintenance and a check of all the safety devices done by qualified personnel.

•  Never touch the delivery group as it is very hot.
•  Do not expose your hands or other body parts in the direction of the coffee dispensing spouts or in the direction of the steam 

and hot water dispensing terminals. The steam and the water that exit the nozzles can cause burns.

•  When in operation, the steam and water nozzles and the filter holder cups are extremely hot and should be handled with care 

only in the indicated parts.

•  Cups must be placed on the special surface only after having been thoroughly dried.
•  The dishes belonging to the machine itself should be placed on the cup surface. It is incorrect to place any other object on this 

surface.

•  Any unauthorised tampering with any parts of the machine renders all guarantees null and void.

GUARANTEE

The guarantee is valid for 12 months on all components except electrical and electronic components 
and expendable pieces.

Содержание LB 4100























Отзывы: