WEG UR11 Series, Руководство пользователя

Страница: 7 / 57

Safety Instructions
1-2 | UR11
1
1.3 PRELIMINARY RECOMMENDATIONS
DANGER!
Only trained personnel, with proper qualifications, and familiar with the UR11 and associated machinery
shall plan and implement the installation, starting, operation, and maintenance of this equipment.
The personnel shall follow all the safety instructions described in this manual and/or defined by the
local regulations.
Failure to comply with the safety instructions may result in death, serious injury, and equipment damage.
NOTE!
For the purpose of this manual, qualified personnel are those trained and able to:
1. Install, ground, power-up, and operate the UR11 according to this manual and to the current
legal safety procedures.
2. Use the protection equipment according to the established regulations.
3. Provide first aid
DANGER!
Always disconnect the main power supply before touching any electrical device associated with the rectifier.
Several components may remain charged with high voltage and/or in movement (fans), even after
the AC power supply has been disconnected or turned off.
When there is a capacitive load connected to the UR11 output (e.g. frequency inverters fed directly
from the DC link), wait at least 10 minutes to guarantee the fully discharge of capacitors.
Always connect the equipment frame to the protection earth (PE) at the suitable connection point.
ATTENTION!
The electronic boards contain components sensitive to electrostatic discharges. Do not touch the
components and terminals directly. If needed, touch first the grounded metal frame or wear an
adequate ground strap.
Do not perform a withstand voltage test on any part of the rectifier unit!
If needed, please, consult WEG.
NOTE!
Rectifiers may cause interference in other electronic devices. Follow the recommendations listed in
chapter 3 INSTALLATION AND CONNECTION on page 3-1 , to minimize these effects.
NOTE!
Fully read this manual before installing or operating the rectifier unit UR11.
ATTENTION!
The operation of this equipment requires installation instructions and detailed operation provided
in this manual.