manualshive.com logo in svg

WEG MOD1 Series, Руководство пользователя

Поделиться
Скачать
WEG MOD1 Series Скачать руководство пользователя страница 7

Safety Instructions

1-2 | MOD1...MOD7

1

1.3 PRELIMINARY RECOMMENDATIONS

DANGER!

Only qualified personnel, familiar with the MODx expansion modules  and related equipment, must 
plan or perform the installation, operation and maintenance of this device. Such personnel must follow 
the safety instructions described in this manual and/or defined by local standards.
Failure to comply with the safety instructions may cause risk of death and/or equipment damage.

NOTE!

For the purposes of this manual, qualified personnel are those trained in order to be able to:
1. Install, ground, power up and operate the RUW100 with the different expansion modules in 

accordance with this manual and the legal safety procedures in force.

2.  Use the protective equipment in accordance with the relevant standards.
3.  Give first aid.

ATTENTION!

Electronic boards have components sensitive to electrostatic discharges. Do not touch directly the 
component parts or connectors. If necessary, first touch the grounded metallic frame or use a proper 
grounding strap.

NOTE!

Read the user manual thoroughly before installing or operating any expansion module for the RUW100.

Содержание MOD1 Series








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды