manualshive.com logo in svg

WEG MMW03-M22CH, Руководство пользователя

Поделиться
Скачать
WEG MMW03-M22CH Скачать руководство пользователя страница 7

www.weg.net

Energy Analyzer - MMW03-M22CH | 7 

1.2 CORRECT USAGE AND CONDITIONS FOR SAFETY

 

„

Installation and wiring must be performed by authorized technicians in accordance with the instructions in 
the user manual. Do not commission the device before proper wiring.

 

„

Make sure the device is de-energized before connecting to the mains.

 

„

Short circuit the k-l terminals of the current transformer in another location before disconnecting the current 
transformers. Failing to do so will cause dangerous high voltages in the secondary terminals of the current 
transformers.

 

„

Use a dry cloth to clean the device. Do not use alcohol, thinner or any abrasive materials.

 

„

Make sure all wiring is properly made before commissioning the device.

 

„

Do not open the device. There are no serviceable parts by the user.

 

„

Keep the device away from humidity, water, vibrations and dust.

 

„

It is advisable to connect a circuit breaker or an automatic fuse between the current input of the device and 
the mains (2 amps).

CAUTION!

The manufacturer does not assume any responsibility for any undesired consequences if the above measures are not 
adhered to.

1.3 PANEL DEFINITIONS

Front Panel

MMW03

10

11

12

13

1

2

3

4

5

6

7

8

9

Figura 1.1: MMW03-M22CH Front Panel

1

Current and Voltage situation :Indicate phase loss of currents and voltages.

2

Sequence error icon

:Indicate sequence error of voltages.

3

Communication active icon

:Indicate that RS485 communication is made.

4

Relay icons

:Indicate that relays are activated.

5

Alarm icon

:Indicate that there is alarm on the system.

6

Pulse output icons

:Indicate that pulse outputs are activated.

Содержание MMW03-M22CH













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды