manualshive.com logo in svg

WEG MMW03-M22CH, Руководство пользователя

Поделиться
Скачать
WEG MMW03-M22CH Скачать руководство пользователя страница 27

www.weg.net

Energy Analyzer - MMW03-M22CH | 27 

CAUTION!

The device restarts if you choose SETINGS, ALARM or All and confirm the action. It will not restart if you choose other 
options. It will clear the values and returns back to the CLEAR menu.

3.6 SAVE, CHANGING VALUE AND APPROVAL PROCEDURE

3.6.1 Changing Value/Setting

BASIC

SETTINGS

Menu titles in the menu "SETTINGS" are displayed in the menu bar. When the submenus are entered into, the 
menu in which the change will occur is shown in the indicator in the first row and the value belonging the related 
setting is shown in the menu bar and the change may be made here.

There are 2 different menus for changing the values:

 

„

Multiple choice menus: These menus contain predefined options. Press the right key to choose and blink 
the first variable of the menu. Press the up/down keys to choose and blink the desired option. Then press 
the left button to complete your choice.

 

„

Menus with numerical input values: In these menus, move through the digits to set the desired value. Press 
the right key to choose and blink the first digit of the variable from the left. Use the right key to move through 
the digits. Use the up/down keys to increase/decrease the value of the active digit. Set the desired values for 
variables by setting the individual digit values and press the left key to complete your action.

CAUTION!

If any change is made on settings, a registration procedure which is questioning whether or not to record the change will be 
active after return to "settings" menu. If the changes are saved, device restarts. See: 3.6.2 Save Prosedure.

3.6.2 Save Procedure

Press the left key until you see the “SAVE” display to confirm or discard the changes you made.

To confirm the changes:
Press the right key to blink the “NO” sign. Use the up/down keys to change the “NO” to “YES”. Then, press the left
key to store the changes.

YES

SAVE

To discard the changes:
Press the right key to blink the “NO” sign. Then exit the menu using the left key without saving your changes.

NO

SAVE

Содержание MMW03-M22CH













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды