Instructions of use
SKIN SCRUBBER
Front panel
1.
Connect the power supply via the rear panel.
2.
Connect the accessories properly to the front/rear
panel as indicated in the sketch.
3.
Turn on the “POWER” button.
4.
Press “FUNCTION” to select the desired function in
the following order: Skin Scrubber, Ultrasonic,
Diamond Dermabrasion, Cold & Hot Hammer.
1.
Place the bracelet around the customer’s wrist.
2.
Apply the appropriate conductive product
generously to the surface of the skin.
3.
Select the desired wave type by pressing “STATE”,
the desired output energy by pressing “ENERGY” and
time of working by pressing “TIMER”. You can change
setting anytime during working.
4.
Press “START/PAUSE” button to start. Once there is
circuit between the client and the scrubber, machine
will start to work. The Scrubber sign on the screen will
run when machine is working normally. Once there is
separation between the scrubber and the client,
machine will pause, and the Scrubber sign on the
screen will stop running.
F-332
4 in 1 beauty
instrument
Timer
Energy
function
select
State
Start/Pause
Notes
A positive earth control system is in place while the
machine is operating. This means that unless the
machine can find an earth return, the system will stop
the current output to the probe. However, once the
probe comes back into contact with the customer (the
earth circuit is found), the system will restart the
output immediately. This is a safety feature and
should not be mistaken for a system fault.
Cautions
•
The ones with the following diseases are required
not to use it: heart disease, infectious disease, a
person with metal in body due to treatment, a person
with extremely sensitive physical structure.
•
Do not keep the probe at the same position of the
skin too long to avoid burning.
•
In case the exclusive liquid is insufficient,
supplement it.
•
As the probe is fitted and unloaded, please do it in
accordance with due order. Do not pull it off with
force.
•
As the power wire is disconnected form the back,
pull it off from the socket. Do not pull its wire off.
•
Do not hit the horn of the probe or damage the
stainless steel surface to avoid skin scratch.
